[FLASH-USERS] [EXT] Problem in converting SEAME data

[Ong Jian Fuh]

Hi Adam,

Thanks for your info. This is very helpful.

Regards,

Dr. Ong Jian Fuh
Extreme Light Infrastructure - Nuclear Physics
"Horia Hulubei" National Institute for Physics and Nuclear Engineering
30 Reactorului Street, 077125 Magurele (Ilfov), Romania
www.eli-np.ro

On 26/08/2021 4:27 pm, Reyes, Adam wrote:
> Hi Ong,
>
> The simulation I was running with the sesame tables didn’t use the 
> radiation diffusion. You can specify a different file for the opacity 
> tables if you’re able to get some from another source, it doesn’t need 
> to be the same table as for the EOS. This would be the 
> “op_targFileType” & “op_targFileName” parameters, where “targ” would 
> be whatever your species name is.
>
> Adam
>
>> On Aug 26, 2021, at 9:08 AM, Ong Jian Fuh <jianfuh.ong at eli-np.ro 
>> <mailto:jianfuh.ong at eli-np.ro>> wrote:
>>
>> Hi Adam,
>>
>> I think you are right. I have the useOpacity=.true. and that is why 
>> the error appears. I just turned off the opacity and it runs. Do you 
>> manage to solve for the opacity problem?
>>
>> Regards,
>>
>> Dr. Ong Jian Fuh
>> Extreme Light Infrastructure - Nuclear Physics
>> "Horia Hulubei" National Institute for Physics and Nuclear Engineering
>> 30 Reactorului Street, 077125 Magurele (Ilfov), Romania
>> www.eli-np.ro
>> On 26/08/2021 4:00 pm, Reyes, Adam wrote:
>>> Hi Ong,
>>>
>>> Are you using the converted sesame table for the opacity table in 
>>> FLASH? I don’t think that opacplot does anything for opacities in 
>>> the sesame tables, or if they are common in the sesame tables to 
>>> begin with.
>>>
>>> I have used successfully sesame tables converted using opacplot2 
>>> with FLASH, but only for EOS not the opacity.
>>>
>>> Adam
>>>
>>>> On Aug 26, 2021, at 8:40 AM, Ong Jian Fuh <jianfuh.ong at eli-np.ro 
>>>> <mailto:jianfuh.ong at eli-np.ro>> wrote:
>>>>
>>>> Hi Adam,
>>>>
>>>> Thanks for your reply. There are some data I can convert (i.e. 
>>>> element 3332) but cannot use with FLASH with the error:
>>>>
>>>> DRIVER_ABORT: [op_readIonmix4Tables] ERROR: no IONMIX4 energy group 
>>>> grid found
>>>>
>>>> So do you manage to get sesame data work for you?
>>>>
>>>> Regards,
>>>>
>>>> Dr. Ong Jian Fuh
>>>> Extreme Light Infrastructure - Nuclear Physics
>>>> "Horia Hulubei" National Institute for Physics and Nuclear Engineering
>>>> 30 Reactorului Street, 077125 Magurele (Ilfov), Romania
>>>> www.eli-np.ro
>>>> On 26/08/2021 3:15 pm, Reyes, Adam wrote:
>>>>> The sesame table you’re trying to convert is probably missing the 
>>>>> 304 tables for the electron EOS. I’ve run into this problem before 
>>>>> for another of the sesame tables that only included the 301 tables 
>>>>> for the total EOS.
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20210826/6783732f/attachment.htm>