[FLASH-USERS] laser vs hydro boundary

[Andy Sha Liao]

Antoine,


You can try defining a transparent material, e.g., "glass" and placing it
around the region where your plasma is evolving.

Instead of tabular opacity or other options, you can just set it to
constant and equal to zero.

You can also try freezing the "glass" so it stays in place with BDRY_VAR.
See if your laser can still be transmitted when the glass is frozen this
way.


Andy


On Sat, Aug 6, 2022 at 9:59 AM Antoine Gintrand <antoine.gintrand at gmail.com>
wrote:

> Dear Flash users,
>
> I am having a problem was a laser slab simulation in 2D with a 2D model of
> laser (not 3D to 2D). The simulation represents the heating by laser of a
> cylinder from one side of the cylinder axis. The cylinder target will be
> ablated by the laser and fill the box until the density in the box is
> homogeneous.
>
> Here, I would like to have reflective boundaries for the flow at all edges
> of my 2D box in order to confine the matter inside it during the heating by
> laser.
>
> First I notice that the reflective boundary also applies to the laser
> rays. Thus when the ray arrives at a reflective boundary it is also
> reflected back to the interior of the box.
>
> Question 1)
>
> Can I have an option to separate the boundaries for the laser and for the
> flow?
>
> Question 2)
>
> Is there a way to confine the plasma with reflective boundaries for the 4
> edges
> of the box and still, be able to let the laser heat the cylinder from a
> side? Now my problem is that if I put a reflective boundary where the laser
> comes from, the laser cannot enter the box, there is an error message and
> the code crashes. Also If I try to set up the laser lens inside the box to
> have the source of energy directly inside the closed box, it is not allowed
> (error message :  Error message is ed_beamsCheck2DRec: Beam lens
> (partially) inside the domain! ).
>
> Any suggestions on those issues would really help me a lot,
>
> Thank you very much for the help,
>
> All the best,
>
> Antoine
>
>
>
> _______________________________________________
> flash-users mailing list
> flash-users at flash.rochester.edu
>
> For list info, including unsubscribe:
> https://flash.rochester.edu/mailman/listinfo/flash-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20220808/1f653db8/attachment.htm>