#	Runtime parameters for the Emery wind tunnel + step problem.

#	Parameters for initial model

#		Ambient pressure and density and inflow velocity.

sim_pAmbient	= 1.0
sim_rhoAmbient	= 1.4
sim_windVel     = 3.0

#		Gas ratio of specific heats

gamma           = 1.4

#	Computational volume parameters

#		Grid geometry

geometry = "cartesian"

#		Size of computational volume

Nblockx		= 15
Nblocky		= 5
xmin		= 0.
xmax		= 3.
ymin		= 0.0
ymax		= 1.0

#		Boundary conditions

xl_boundary_type = "user"
xr_boundary_type = "outflow"

yl_boundary_type = "reflect"
yr_boundary_type = "reflect"


#	Simulation (grid, time, I/O) parameters

cfl		= 0.8
lrefine_max     = 4
refine_var_1 = "dens"
refine_var_2 = "pres"
basenm          = "windtunnel_4lev_"
restart         = .false.
checkpointFileIntervalTime          = 0.5
plotFileIntervalTime          = 0.1
nend            = 100000
tmax            = 4.0
eintSwitch     = 1.e-4

plot_var_1	= "dens"
plot_var_2	= "pres"
plot_var_3	= "temp"
plot_var_4	= "velx"
plot_var_5	= "vely"
plot_var_6	= "velz"

## -------------------------------------------------------------##
##  SWITCHES SPECIFIC TO THE UNSPLIT HYDRO SOLVER               ##
#	I. INTERPOLATION SCHEME:
order		= 2      # Interpolation order (first/second/third/fifth order)
slopeLimiter    = "mc"   # Slope limiters (minmod, mc, vanLeer, hybrid, limited)
LimitedSlopeBeta= 1.     # Slope parameter for the "limited" slope by Toro
charLimiting	= .true. # Characteristic limiting vs. Primitive limiting

use_avisc	= .false. # use artificial viscosity (originally for PPM)
cvisc		= 0.1     # coefficient for artificial viscosity
use_flattening	= .false. # use flattening (dissipative) (originally for PPM)
use_steepening	= .false. # use contact steepening (originally for PPM)
use_upwindTVD	= .false. # use upwind biased TVD slope for PPM (need nguard=6)

#	II. RIEMANN SOLVERS:
RiemannSolver	= "hllc"       # Roe, HLL, HLLC, LLF, Marquina
entropy         = .true.     # Entropy fix for the Roe solver

#	III. STRONG SHOCK HANDELING SCHEME:
shockDetect	= .false.     # Shock Detect for numerical stability
## -------------------------------------------------------------##

## ---------------------------------------------------------------##
##  SWITCHES SPECIFIC TO THE SUPER-TIME-STEPPING (STS) ALGORITHM  ##
##  NOTE: For details on using STS runtime parameters, please     ##
##        refer to user's guide (Driver chapter).                 ##
useSTS                  = .false.
nstepTotalSTS           = 5
nuSTS                   = 0.2
## ---------------------------------------------------------------##