<div dir="ltr">Hello FLASH Users,<div><br></div><div>I'm starting a 3D simulation, but it fails to initialize when I set the size of the blocks in the z-direction to around 0.32 cm. However, it successfully initializes when I set the size of the blocks in the z-direction to at least 0.64 cm. In all of my tries, I have the sizes in the x- and y-directions to 0.32 cm, so it seems like it's only the z-direction that causes this issue. Do any of you know why this might be the case?</div><div><br></div><div>I have the output of the scenario where it fails to initialize attached as a screenshot. Part of the issue seems to be that the simulation has a hard time reading an ionmix table, but I'm not completely sure.</div><div><br></div><div>For reference, I'm using Cartesian coordinates, my blocks are 16x16x16, and I'm using the same units that come with the LaserSlab example.</div><div><br></div><div>Best wishes,</div><div>Lars Pedersen</div></div>