FLASH4.6.2 API

   These are the runtime parameters used by the basic Grid unit.
   Your specific implementation (Paramesh, UG) WILL have more 
   runtime parameters particular to that unit. Since parameters
   inheritance is cumulative, all of the ones described here will
   be included by all the specific implementations.

   To see the default parameter values and all the runtime parameters
   specific to your simulation check the "setup_params" file in your
   object directory.
   You might have overwritten these values with the flash.par values
   for your specific run.  

    bndPriorityOne [INTEGER]
        indicates which axis, x,y,z has priority in guardcell filling at
        the physical boundaries.
        Defines priority of x direction boundary filling, can be 1,2 or 3
    bndPriorityThree [INTEGER]
        defines priority of z direction boundary filling, can be 1,2 or 3
    bndPriorityTwo [INTEGER]
        defines priority of y direction boundary filling, can be 1,2 or 3
    convertToConsvdForMeshCalls [BOOLEAN]
        indicates if vars are converted from primitive (i.e., velocity) to conservative 
        (i.e., momentum) before Grid functions that interpolate data are invoked.
        With PARAMESH3 or later, convertToConsvdInMeshInterp should be used instead.
    geometry [STRING]
        Grid geometry, one of "cartesian", "spherical", "cylindrical", "polar"
    unbiased_geometry [BOOLEAN]
        attempt to remove floating point bias from geometry discretization
        NOT YET IMPLEMENTED
    xl_boundary_type [STRING]
        lower (left) boundary condition in x dir
    xmax [REAL]
        physical domain upper bound in x dir
    xmin [REAL]
        physical domain lower bound in x dir
    xr_boundary_type [STRING]
        upper (right) boundary condition in x dir
    yl_boundary_type [STRING]
        lower boundary condition in y dir
    ymax [REAL]
        physical domain upper bound in y dir
    ymin [REAL]
        physical domain lower bound in y dir
    yr_boundary_type [STRING]
        upper boundary condition in y dir
    zl_boundary_type [STRING]
        lower boundary condition in z dir
    zmax [REAL]
        physical domain lower bound in x dir
    zmin [REAL]
        physical domain lower bound in z dir
    zr_boundary_type [STRING]
        upper boundary condition in z dir
    eosMode [STRING]
        the default Eos mode, usually MODE_DENS_EI, 
        where density and energy are provided to 
        calculate pressure and temperature
    smallx [REAL]  
        cutoff value for abundances, used in Paramesh2 "monotonic" interpolation
        for mesh prolongation
    interpol_order [INTEGER]  
        the order of interpolation, used in Paramesh2 "monotonic" interpolation
        for mesh prolongation

    useParticles [BOOLEAN]
        Whether to initialize and advance particles
    pt_maxPerProc [INTEGER]
        Maximum number of particles per processor