[FLASH-USERS] buld problem, Makefile generation

[Anthony Scopatz]

Hi Jon,

flmake doesn't change the way that the setup script works at all.  Their
implementations are separate and flmake doesn't add anything to the flash
source dir, it only pulls things out.  If you are seeing a change with
setup now vs before, this is likely because some part of your environment
has changed.  Since it is affecting Makefiles my guess is that the site
that is being selected is different and/or your hostname has changed.

Can you please post the output of ./setup Sedov -auto and flmake setup?
Thanks.

Be Well
Anthony


On Fri, Jun 14, 2013 at 12:53 PM, Slavin, Jonathan
<jslavin at cfa.harvard.edu>wrote:

> Hi Anthony,
>
> So I did leave something out of my message.  That is that when, today, I
> did
> ./setup Sedov -auto
> (in the main FLASH directory) and then
> cd object
> make
> I had the same problem as with using flmake.  But when I followed the same
> steps a few days ago, I didn't have this problem.  The only thing that has
> changed in the meantime is that I used flmake.  So it seems to me that
> flmake must have generated some file that has changed the way setup creates
> the Makefile.
> The flmake commands were (in a sub-directory temp under main dir):
> flmake setup Sedov -auto
> flmake build
>
> Which routine actually writes the Makefile?  It seems to involve a bunch
> of routines in FLASH4.0.1/bin, at least using setup.
>
> Jon
>
> ________________________________________________________
> Jonathan D. Slavin                 Harvard-Smithsonian CfA
> jslavin at cfa.harvard.edu       60 Garden Street, MS 83
> phone: (617) 496-7981       Cambridge, MA 02138-1516
> fax: (617) 496-7577            USA
> ________________________________________________________
>
>
>
> On Fri, Jun 14, 2013 at 1:17 PM, Anthony Scopatz <
> scopatz at flash.uchicago.edu> wrote:
>
>> Hi Jon,
>>
>> I am not sure what would cause this difference unless it is flmake is
>> picking up a different Makefile than what the setup script does.  What
>> setup script line did you use?  What were the flmake commands that you
>> issued to get this, and what are the contents of your flashrc.py if you
>> have one?
>>
>> Thanks.
>>
>> Be Well
>> Anthony
>>
>>
>> On Fri, Jun 14, 2013 at 11:57 AM, Slavin, Jonathan <
>> jslavin at cfa.harvard.edu> wrote:
>>
>>> Hi all,
>>>
>>> I've run into a completely different flmake related problem.  Earlier,
>>> following the Quickstart instructions (and after a bunch of fiddling with
>>> the Makefile) I was able to get FLASH to build and then run successfully.
>>>  But when I tried the flmake approach, the build failed with an odd error.
>>>  The error was in the linking.
>>>
>>> Comparing the successful Makefile and unsuccessful Makefile I got this
>>> from diff:
>>> 51,52c51,52
>>> < LIB := $(LIB_HDF5) $(LIB_MPI) $(LIB_OPT)
>>> < CFLAGS := $(CFLAGS_HDF5) $(CFLAGS_OPT)
>>> ---
>>> > LIB := $(LIB_HDF5) $(LIB_MPI) $(LIB)
>>> > CFLAGS := $(CFLAGS_HDF5) $(CFLAGS_MPI) $(CFLAGS_OPT)
>>> I edited the unsuccesful one and replaced the $(LIB) with $(LIB_OPT) and
>>> removed $(CFLAGS_MPI) (though I think the latter has no effect) and voila,
>>> success again.
>>>
>>> So my question is, is that a bug in flmake that causes the generated
>>> Makefile to use $(LIB) in that place instead of $(LIB_OPT)?  Or do I have
>>> some odd configuration that causes that.  I'm not so clear on how the
>>> Makefile is generated.
>>>
>>> Jon
>>> ________________________________________________________
>>> Jonathan D. Slavin                 Harvard-Smithsonian CfA
>>> jslavin at cfa.harvard.edu       60 Garden Street, MS 83
>>> phone: (617) 496-7981       Cambridge, MA 02138-1516
>>> fax: (617) 496-7577            USA
>>> ________________________________________________________
>>>
>>>
>>
>>
>> --
>> Anthony Scopatz
>> Post-doctoral Scholar
>> The FLASH Center for Computational Science
>> Dept. of Astronomy and Astrophysics
>> The University of Chicago
>> cell: (512) U2-PU239
>> office: (773) 834-2705
>> fax:(773) 834-3230
>> http://flash.uchicago.edu
>>
>
>


-- 
Anthony Scopatz
Post-doctoral Scholar
The FLASH Center for Computational Science
Dept. of Astronomy and Astrophysics
The University of Chicago
cell: (512) U2-PU239
office: (773) 834-2705
fax:(773) 834-3230
http://flash.uchicago.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20130614/a7a4912a/attachment-0001.htm>