[FLASH-USERS] increase pt_maxPerProc
Mario Manuel
mmanuel at umich.edu
Thu Nov 6 10:34:24 EST 2014
Hello Users,
I imagine there is a simple solution for this. Here is the last few lines of the output:
50195 1.8206E-09 1.2130E-13 ( 1.021E-03, 2.677E-02, 0.000E+00) | 1.213E-13 5.716E+84 5.146E+87 4.000E-01
iteration, no. not moved = 0 982
iteration, no. not moved = 1 8
iteration, no. not moved = 2 0
refined: total leaf blocks = 6220
refined: total blocks = 8292
50196 1.8207E-09 1.2127E-13 ( 1.021E-03, 2.677E-02, 0.000E+00) | 1.213E-13 5.702E+84 5.145E+87 4.000E-01
Overflow! Mesh PE 1 , gettingFrom 5 , recvCount 2087 , max particles 10000
DRIVER_ABORT: [gr_ptMove]: Insufficient space in particles communication buffer: increase pt_maxPerProc
I did as it says, “increase pt_maxPerProc”, by adding the line
pt_maxPerProc = 20000
in my flash.par file. It says “max particles 10000”, so I figured a factor of 2 ought to give me enough room to work. Do I need to change this somewhere else? I searched the FLASH guide for “pt_maxPerProc”, but no luck.
As always, any help from the community is very much welcomed.
Cheers,
Mario
______________________________________
Dr. Mario Manuel
Einstein Postdoctoral Fellow, Smithsonian Astrophysical Observatory
mmanuel at umich.edu
617-899-8381
University of Michigan
Space Research Building
2455 Hayward Street
Ann Arbor, MI 48109
Office: 734-764-4585
______________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20141106/184a36e3/attachment.htm>
More information about the flash-users
mailing list