[FLASH-USERS] Laser heated target

[Scott Feister]

Hi Theo,

Happy to help!

In the LaserSlab example simulation, the author declares two species,
"targ" and "cham", at the setup line:
"./setup -auto LaserSlab species=cham,targ ..."

For your new simulation, you'll want to define your own three species, e.g.
"cham", "foil", and "jet":
"./setup -auto LaserSlab species=cham,foil,jet ..."

You'll then need to edit your flash.par and simulation_initBlock.F90 to
utilize these three species! In flash.par file, you will specify your own
EOS tables, etc. The geometric part of your problem will take place within
simulation_initBlock.F90. Take a look at how in LaserSlab's file, take a
good look at how the geometry is specified. Where you see in LaserSlab the
use of cham and targ, you will replace and build your own geometry.The
region of target gets separated from the region of cham through "if"
statements. Make your own if statements (e.g. specifying if y < 0 but x >
1, set to species foil...) to adapt to your use case.

Good luck!

Best,

Scott

On Wed, Aug 22, 2018 at 5:28 AM t_schlegel at t-online.de <
t_schlegel at t-online.de> wrote:

> Hi all,
>
>
> I am going to simulate a problem with a laser heated foil (say aluminum)
> with expanding plasma from its back
>
> towards another target (say a gas jet). Both targets are separated by
> low-density gas (e.g. helium, like in the Laserslab
>
> example). The laser is coming almost normally to the front side of the
> aluminum foil (or another metal).
>
> So far, I was preparing the atomic data (EOS, opacities). Now, I would
> like to get some primary help in setting up the
>
> geometric parameters of the simulation. The laser part I can take from the
> mentioned example case.
>
> How should I define correctly the case of more than two species and their
> positions?
>
> Probably, it makes sense to start in 1D. Later, the 2D geometry and the
> MHD option can be applied.
>
>
> Thanks in advance
>
>
> Theo
>
>
> 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20180822/995ab112/attachment-0001.htm>