[FLASH-USERS] 1D laser question

[John Kline]

I have a laser question. I have setup a 1D foil problem. I want to shock the
foil from both sides. However, the laser will only hit the foil when the
xlens position is negative. You will likely need more information but below
is the setup for my two beams. Beam 1 hits the target fine. Beam 2 does not
seem to hit the target.  The target sits between 140 and 160 um in the
simulation. Any thoughts?

 

John

 

 

### SETUP LASER BEAM ###

ed_numberOfBeams = 2

 

#setup beam 1:

ed_lensX_1                    =  -1000.0e-04

ed_targetX_1                  =  140.0e-04

ed_pulseNumber_1              =  1

ed_wavelength_1               =  1.053

ed_crossSectionFunctionType_1 = "uniform"

ed_numberOfRays_1             =  1

ed_gridType_1                 = "regular1D"

ed_gridnRadialTics_1          =  1

 

 

#setup beam 2:

ed_lensX_2                    =   1000.0e-04

ed_targetX_2                  =  160.0e-04

ed_pulseNumber_2              =  1

ed_wavelength_2               =  1.053

ed_crossSectionFunctionType_2 = "uniform"

ed_numberOfRays_2             =  1

ed_gridType_2                 = "regular1D"

ed_gridnRadialTics_2          =  1

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20180106/0c6a251d/attachment.htm>