[FLASH-USERS] Plot_var issues

[Ernesto Zurbriggen]

Hi Camile!
I'm pretty sure your problem is not an issue. You gave too little
information, but the problem may be in:

   1. How you call the REQUIRES resistivity unit in your Conf file,
e.g.: REQUIRES
   physics/materialProperties/MagneticResistivity/MagneticResistivityMain
   2. How you are calculating the resistivity in the routine
   MagneticResistivity.F90
   3. Or how you initialize runtime parameter like: plot_var_#;
useDiffuse; resistivity;
   or pc_unitsBase.


Best!



El lun., 7 sept. 2020 a las 18:22, Camille Samulski (<csamulski at vt.edu>)
escribió:

> Hi All,
>
> I am testing out various constant resistivity cases, and have found that
> regardless of the resistivity value I set the plot_var_x for resi gives
> only zeros.  In other setups with SpitzerHighZ I've always had plot_var_x =
> resi populate correctly, so I'm unsure if this is a constant resistivity
> issue or something else?
>
> Thanks,
> Camille Samulski
>
> PhD Candidate
> Kevin T. Crofton Department of Aerospace and Ocean Engineering
> Virginia Tech
>


-- 
*Dr. Ernesto Zurbriggen, FAPESP posdoctoral fellow*



*Email: ernesto.zurbriggen at craam.mackenzie.br
<ernesto.zurbriggen at craam.mackenzie.br>Phone: +55 11-2114-8783*
*Universidade Presbiteriana Mackenzie, *
*Escola de Engenharia, *
*Centro de Rádio Astronomia e Astrofísica Mackenzie (CRAAM),*
*Rua da Consolação 896, 01302-907, SP, São Paulo, Brasil.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20200908/eb5a6d10/attachment-0001.htm>