[FLASH-USERS] Setting of average atomic mass
pchang
pchang at mail.ncku.edu.tw
Thu Jun 2 10:17:42 EDT 2022
Hi Andy,
I tried to follow LaserSlab example and I can create three materials
"CDN", "GasR", "GasB". In the log file, I do see the Multifluid database
contents.
Initially defined values of species:
Name Index Total Positive Neutral Negative bind Ener
Gamma eosType
cdn 13 2.70E+01 1.30E+01 -9.99E+02 -9.99E+02 -9.99E+02
1.40E+00 321
gasb 14 4.00E+00 2.00E+00 -9.99E+02 -9.99E+02 -9.99E+02
1.67E+00 321
gasr 15 4.00E+00 2.00E+00 -9.99E+02 -9.99E+02 -9.99E+02
1.67E+00 321
In the export file, I also have three materials occupying at the right
locations. However, I found that it still uses the global "gamma", not
ms_CDNGamma, ms_GasBGamma, ms_GasRGamma. Also, it still uses A=1 for
calculating the pressure from given density and temperature.
In the Config file, I have:
REQUIRES physics/Hydro
REQUIRES physics/Eos/EosMain/Gamma
REQUIRES Multispecies
I couldn't figure out why the ms_CDNA, ms_GasBA, and ms_GasRA are not
used in the program. Any suggestions? Thank you.
Best,
Po-Yu
Andy Sha Liao 於 2022/5/30 下午 09:46 寫道:
> Po-Yu Chang,
>
>
> I recommend that you study the LaserSlab example and then build your
> simulations from that example.
>
> LaserSlab uses the Multispecies unit where you can set materials,
> e.g., argon, so you can study how they interact to apply to your own
> problem.
>
>
> Andy
>
>
>
>
> On Sun, May 29, 2022 at 1:35 PM Po-Yu Chang <pchang at mail.ncku.edu.tw>
> wrote:
>
> Hi all,
>
> I am simulating a pure hydrodynamic problem at this point.
> Therefore, I
> modified the example "FlatPlate" for my simulations. In that
> example, I
> specified the pressure and the density of the gas. Then, the
> temperature
> is calculated somewhere in the program. I found that the average
> atomic
> mass is A=1. However, I would like to simulate an Argon gas, i.e.,
> A=40,
> but I couldn't find a place to define the average atomic mass. Do
> anyone
> know how I can define the average atomic mass? Thank you.
>
> Cheers,
>
> Po-Yu
>
> --
> Po-Yu Chang
> Assistant Professor
> Institute of Space and Plasma Sciences (ISAPS)
> National Cheng Kung University (NCKU)
> No.1, University Road,
> Tainan City 70101, Taiwan
> (TEL) +886-6-2757575 ext. 65916
> pchang at mail.ncku.edu.tw
> http://capst.ncku.edu.tw/PGS/
>
> _______________________________________________
> flash-users mailing list
> flash-users at flash.rochester.edu
>
> For list info, including unsubscribe:
> https://flash.rochester.edu/mailman/listinfo/flash-users
>
--
Po-Yu Chang
Assistant Professor
Institute of Space and Plasma Sciences (ISAPS)
National Cheng Kung University (NCKU)
No.1, University Road,
Tainan City 70101, Taiwan
(TEL) +886-6-2757575 ext. 65916
pchang at mail.ncku.edu.tw
http://capst.ncku.edu.tw/PGS/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20220602/813dd57b/attachment.htm>
More information about the flash-users
mailing list