Flash Center for Computational Science


diagnostics/XrayImaging
    useXrayImaging [BOOLEAN] CONSTANT [FALSE]
        Use X-ray Imaging module

diagnostics/XrayImaging/XrayImagingMain/Simple
    threadXrayTrace [BOOLEAN] [true]
        Use threading when tracing the X-rays through each block?
    useXrayImaging [BOOLEAN] [true]
        Use the X-ray imaging?
    xray_3Din2D [BOOLEAN] [false]
        Use 3D X-rays in a 2D cylindrical domain X-ray imaging application?
    xray_XrayDeterminism [BOOLEAN] [false]
        If true, the Grid Unit will use the Sieve Algorithm to move the X-ray.
    xray_cellWallThicknessFactor [REAL] [1.0e-06]
        Valid Values: Unconstrained
        Fraction of the shortest cell edge defining the cell wall thickness
    xray_detectorAlignWRTorigin_1 [BOOLEAN] [false]
        Place detector normal vector along X-ray origin? 1
    xray_detectorCenterX_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The x coordinate of the square detector center 1
    xray_detectorCenterY_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The y coordinate of the square detector center 1
    xray_detectorCenterZ_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The z coordinate of the square detector center 1
    xray_detectorDGwriteFormat [STRING] ["es15.5"]
        Valid Values: Unconstrained
        Format string for writing out diagnostic variables to detector file(s)
    xray_detectorEnergyLevelCount_1 [INTEGER] [-HUGE(1)]
        Valid Values: Unconstrained
        Number of detector X-ray energy levels  1
    xray_detectorEnergy_1_Fraction_1 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy fraction [0-1] 1 for the detector 1
    xray_detectorEnergy_1_Fraction_2 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy fraction [0-1] 2 for the detector 1
    xray_detectorEnergy_1_Fraction_3 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy fraction [0-1] 3 for the detector 1
    xray_detectorEnergy_1_Level_1 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy (eV) of level 1 for the detector 1
    xray_detectorEnergy_1_Level_2 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy (eV) of level 2 for the detector 1
    xray_detectorEnergy_1_Level_3 [REAL] [-1.0]
        Valid Values: Unconstrained
        The X-ray energy (eV) of level 3 for the detector 1
    xray_detectorFileNameTimeStamp [BOOLEAN] [true]
        If true, a time stamp is added to each detector file name
    xray_detectorNormalX_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The x coordinate of the square detector normal vector 1
    xray_detectorNormalY_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The y coordinate of the square detector normal vector 1
    xray_detectorNormalZ_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The z coordinate of the square detector normal vector 1
    xray_detectorOriginX_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The x coordinate of the X-ray origin 1
    xray_detectorOriginY_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The y coordinate of the X-ray origin 1
    xray_detectorOriginZ_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The z coordinate of the X-ray origin 1
    xray_detectorPerpXrays_1 [BOOLEAN] [false]
        Should X-rays hit detector perpendicular on screen? 1
    xray_detectorResolution_1 [INTEGER] [-HUGE(1)]
        Valid Values: Unconstrained
        The square detector resolution R (number of pixels = R x R) 1
    xray_detectorSideLength_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The side length of the square detector 1
    xray_detectorSideTiltingAngle_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        Side tilting angle (degrees) from tilting axis 1
    xray_detectorSideTiltingAxis_1 [STRING] [" "]
        Valid Values: Unconstrained
        Global tilting axis to be used for side tilting 1
    xray_detectorTime2record_1 [REAL] [-HUGE(1.0)]
        Valid Values: Unconstrained
        The simulation time at which the X-ray imaging should be done 1
    xray_detectorXYwriteFormat [STRING] ["es20.10"]
        Valid Values: Unconstrained
        Format string for writing out X-ray (x,y) pairs to detector file(s)
    xray_maxXrayCount [INTEGER] [100000]
        Valid Values: Unconstrained
        Maximum number of X-rays per processor
    xray_numberOfDetectors [INTEGER] [-1]
        Valid Values: Unconstrained
        Total number of X-ray detectors
    xray_printDetectors [BOOLEAN] [false]
        Print details about each detector?
    xray_printMain [BOOLEAN] [false]
        Print details about the X-ray imaging run?
    xray_printSpecies [BOOLEAN] [false]
        Print details about the species present in the current simulation?
    xray_printXrays [BOOLEAN] [false]
        Print details about each X-ray initially generated?
    xray_recalculateCellData [BOOLEAN] [false]
        If true, the X-ray imaging calculates its own cell data for each block
    xray_screenXrayBucketSize [INTEGER] [100000]
        Valid Values: Unconstrained
        Bucket size for flushing out screen X-rays to disk.
Runtime Parameters Documentation for FLASH Release 4.6
