[FLASH-USERS] FLASH increasing AMR through lrefine_max and running into MAXBLOCKS issue

Kaldawi, Thomas Tkal at lle.rochester.edu
Tue Aug 1 20:15:18 EDT 2023


Not sure if it would fix the other issues, but just keep increasing the max blocks in setup until you cannot run the simulation anymore. I run it on a supercomputer, but I usually cap it around 10,000 blocks.

Sincerely,

Thomas Kaldawi

On Aug 1, 2023, at 18:39, Sharma, Divyanshu Raj <sharma22 at llnl.gov> wrote:


Hi Flash Users,

I am trying to increase lrefinemax and see where the solution converges on the LaserSlab example. When doing this and taking lrefinemax from 9 to 16 I ran into a bunch of inconsistent errors. The main errors are shown below. It is just weird because I know that MAXBLOCKS is set to 1000 by default and I can increase it but would that take care of the other errors. I also was wondering if there was any intuition on how much should MAXBLOCKS be changed by and if that would have an impact on the runtime of the simulations or is it just once in allocating the memory.

Lrefine_max = 9:
ERROR: could not move all blocks in amr_redist_blk
  Try increasing maxblocks or use more processors

Lrefine_max = 10:
Time limit exceeded (weird cause it didn’t burnout like 9)

Lrefine_max = 11:
Same as 10

Lrefine_max = 12:
Same as 10

Lrefine_max = 13:
[hy_uhd_unsplitUpdateMultiTemp] Negative 3T internal energy, CHECK LOG
application called MPI_Abort(MPI_COMM_WORLD, 1) - process 46

Lrefine_max = 14:
Too many blocks!  Increase MAXBLOCKS or use more processors.
application called MPI_Abort(comm=0x84000006, 32767) - process 140

Lrefine_max = 15:
[hy_uhd_unsplitUpdateMultiTemp] Negative 3T internal energy, CHECK LOG

Lrefine_max = 16:
Too many blocks!  Increase MAXBLOCKS or use more processors.
application called MPI_Abort(comm=0x84000006, 32767) - process 117
_______________________________________________
flash-users mailing list
flash-users at flash.rochester.edu

For list info, including unsubscribe:
https://flash.rochester.edu/mailman/listinfo/flash-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20230802/b7d3b625/attachment.htm>


More information about the flash-users mailing list