[FLASH-USERS] Extra Refinement for Area

[Kaldawi, Thomas]

Hello,

I am trying to add refinement to a specific area of the LaserSlab simulation. In the Pdf I sent, I have the entire simulation, which is just a target, support, and two very thin foils at the bottom connected to the support. As you can see, I have refined the edges of the target and the support; however, the foils are too thin to be recognized. If I increase the total blocks in the y direction to ~70, the two foils can easily be distinguished, but I do not want this much refinement in the rest of the simulation. Is there a way to simply add blocks/refine only a certain area in the simulation?

For clarification, the foils are two different sizes, one is half a micron, and the other is around 30 nanometers; thus, I need a fairly high level of refinement for that area. Also, the foils are supposed to connect from the yellow/green support to the left wall. However, they cut off before reaching the left side of the window. So, the red foil is indeed supposed to appear between those sections, but for some reason it just cuts off even more than the second foil.

Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20230606/8301b815/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FLASH_Foil.pdf
Type: application/pdf
Size: 86520 bytes
Desc: FLASH_Foil.pdf
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20230606/8301b815/attachment.pdf>