[FLASH-USERS] [Eos_putData] ERROR Density or Internal Energy are zero after a call to EOS!

[Anshu Dubey]

The fact that density is 0 indicates that you may have a problem in the
initialization. And if it is out of the box simulation, then of course the
initialization routine is the well tested one used daily in FLASH test
suite. Could you try setting it up without the portable option ? If you have
made any changes to the default initialization or flash.par file, could you
first try to run the out of the box version.

If that also doesn't help, then there may be some issue with your
libraries/compiler configuration
Anshu


On Thu, Jul 8, 2010 at 11:43 PM, Kunal Rao <kunalgrao at gmail.com> wrote:

> Hi
>
>    I am still stuck with this. Can anyone please let me know how to resolve
> it ?
>
> Thanks & Regards,
> Kunal
>
> On Wed, Jul 7, 2010 at 4:11 PM, Kunal Rao <kunalgrao at gmail.com> wrote:
>
>> Hi
>>
>> I have setup FLASH3.2 Sedov simulation as follows:
>>
>> $./setup Sedov -auto -makefile=pg -ostype=Linux -portable +noio
>>
>> It is successfully compiling but when I run it on single processor using
>> $./flash3.exe I get the following error:
>>
>>
>> ------------------------------------------------------------------------------------------------------------------
>>    Perhaps the initialization routine is wrong..... or
>>    perhaps the runtime parameter eosMode is wrong.
>>       Check constants.h to determine value of MODE_DENS_??
>>
>>  Driver_abort called. See log file for details.
>>  Error message is
>>  [Eos_putData] ERROR Density or Internal Energy are zero after a call to
>> EOS!
>>  Calling MPI_Abort() for shutdown in   2 seconds!
>>
>> job aborted:
>> [ranks] message
>>
>> [0] application aborted
>> aborting MPI_COMM_WORLD, error 1, comm rank 0
>>
>>
>> -----------------------------------------------------------------------------------------------------------------------------
>>
>> I checked in my constants.h the value of MODE_DENS_?? is as follows:
>>
>> -------------------------------------------------------
>> #define MODE_DENS_TEMP 101
>> #define MODE_DENS_EI 102
>> #define MODE_DENS_PRES 103
>> --------------------------------------------------------
>>
>> and my Sedov.log file contains the following:
>>
>>
>> ------------------------------------------------------------------------------------------------------------------------------
>>
>>  [ 07-07-2010  15:50:15.490 ] [GRID amr_refine_derefine]: initiating
>> refinement
>>  [GRID amr_refine_derefine] min blks 1    max blks 1    tot blks 1
>>  [GRID amr_refine_derefine] min leaf blks 1    max leaf blks 1    tot leaf
>> blks 1
>>  [ 07-07-2010  15:50:15.490 ] [GRID amr_refine_derefine]: refinement
>> complete
>>  [ 07-07-2010  15:50:15.505 ] [GRID gr_expandDomain]: iteration=1, create
>> level=2
>>  INFO: Grid_fillGuardCells is ignoring masking.
>>  [ 07-07-2010  15:50:15.505 ] [mpi_amr_comm_setup]: buffer_dim_send=1,
>> buffer_dim_recv=1
>>  [ 07-07-2010  15:50:15.505 ] WARNING after gc filling: min.
>> unk(DENS_VAR)=0.000
>> 000000000000000000 PE=0 block=1 type=1
>>  [ 07-07-2010  15:50:15.521 ] WARNING after gc filling: min.
>> unk(ENER_VAR)=0.000
>> 000000000000 PE=0 block=1 type=1
>>  [ 07-07-2010  15:50:15.521 ] WARNING after gc filling: min.
>> unk(EINT_VAR)=0.000
>> 000000000000 PE=0 block=1 type=1
>>  [Eos_putData] ERROR Density or Internal Energy are zero after a call to
>> EOS!^M
>>  [ 07-07-2010  15:50:15.536 ] [DRIVER_ABORT]: Driver_abort() called by
>> PE 0
>>  [ 07-07-2010  15:50:15.536 ] abort_message: [Eos_putData] ERROR Density
>> or Inte
>> rnal Energy are zero after a call to EOS!
>>
>>
>> -----------------------------------------------------------------------------------------------------------------------------
>>
>> Can you please suggest what changes I need to make to have it working
>> properly?
>>
>> Thanks & Regards,
>> Kunal
>>
>> P.S. I am attaching my flash.par file for your reference.
>>
>>
>


-- 
Anshu Dubey
Associate Director and CS/Applications Group Leader
ASC/Flash Center
Fellow, Computation Institute
University of Chicago and Argonne National Laboratory
773 834 2999 (office)
312 420 0033 (mobile)
773 834 3230 (fax)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://flash.rochester.edu/pipermail/flash-users/attachments/20100709/ea1fa1af/attachment-0001.htm>